Detailed explanation of the use of electric impact rammer

    I. Operation steps
1. Confirm the working area: Before using the electric impact rammer, you need to confirm the working area first and keep the ground flat, clean, dry and free of impurities.
2. Adjust the vibration frequency: According to the use requirements, adjust the vibration frequency of the electric impact rammer, generally recommended between 40-50Hz.
3. Turn on the power: Plug the power plug into the socket and turn on the power.
4. Install auxiliary equipment: Install auxiliary equipment such as additional weights, vibration plates, etc. as needed.
5. Start operation: Place the electric impact rammer on the work surface, adjust the vibration frequency according to the use requirements, hold the handle tightly when the body is in a balanced state, and start operation.
6. Turn off the power: After the work is completed, disconnect the power and clean the electric impact rammer.
    II. Precautions
1. Wear safety equipment: Before using the electric impact rammer, you should wear safety equipment such as safety shoes and gloves to prevent accidental injuries.
2. Pre-operation inspection: Before using the electric impact rammer, you should check whether the equipment is damaged and whether the power is connected to ensure safe operation.
3. Avoid fatigue operation: When using an electric rammer, fatigue operation should be avoided, and standardized working hours and rest time should be observed.
4. Pay attention to geological conditions: Before using an electric rammer, pay attention to the ground geological conditions, especially in cases of lawns, soft soil, etc., and operate with caution.
5. Prevent overload: When using an electric rammer, avoid overload operation to avoid damaging the equipment.
    III. Maintenance
1. Regular cleaning: After using an electric rammer, the equipment should be cleaned regularly, especially when using materials such as sand and gravel.
2. Check the wires: The connection and wear of the wires should be checked regularly and replaced in time.
3. Safe storage: After using an electric rammer, the equipment should be stored safely to avoid long-term exposure or excessive humidity.
4. Regular maintenance: In order to ensure the normal use of the electric rammer, the equipment should be maintained regularly and worn parts should be replaced.
    In short, electric rammers are indispensable equipment in the fields of construction and construction. Correct operation methods and maintenance can better play their role and help the development of construction, infrastructure construction and other fields.