Instructions for use of steel bar bending machine
![](/Uploads/image/20240709/20240709000405_66313.jpg)
The steel bar bending machine is a mechanical equipment used to process steel bar bending hoops. The following are its instructions for use:
1. Preparation:
Make sure the machine is on a stable workbench or ground.
Keep the working area around the machine clean and make sure there is no debris that hinders the normal operation of the equipment.
Check whether the machine is connected to the power supply and make sure that the voltage is consistent with the equipment identification.
2. Steel bar preparation:
Prepare the steel bars to be processed according to the required length and specifications.
Place the steel bars on the processing position of the machine and adjust the position and direction of the steel bars as needed.
3. Equipment operation:
Turn on the power switch of the machine and make sure that the machine is in normal working condition. Adjust the settings of the bending angle and radius on the machine as needed.
Adjust the bending hoop tool on the machine to the appropriate position so that it contacts the steel bar.
Start the machine by pulling the handle on the machine or pressing the button to start processing the steel bar bending hoops.
After the machine stops running, take out the processed bending hoops.
4. Safety precautions:
Before operating the machine, please wear protective gloves and goggles to prevent accidental injuries.
Do not bring your fingers or other objects close to the working area of the machine to avoid being pinched or injured.
Please pay attention to the people and objects around you during operation and ensure a safe distance.
After using the machine for a long time, you should pay attention to whether the machine is overheated and stop using it in time to avoid damaging the equipment or causing a fire.