Rebar straightening machine maintenance guide

I. Daily maintenance of the machine

1. Regularly clean the dust and dirt on the surface of the machine to keep it clean and tidy.
2. Check the lubrication system and maintain sufficient lubricating oil to prevent mechanical damage to key components due to poor lubrication.
3. Regularly check for abnormal noise and vibration during machine operation, and eliminate problems in a timely manner.
4. Check the wires and power plug to ensure the electrical system is functioning properly.
II. Regular maintenance of machines
1. Check the transmission system and transmission belt of the steel bar straightening machine to ensure that the belt is appropriately tight and not excessively worn.
2. Check the screw guide wheel and guide wheel seat to prevent the steel bar straightening machine from not working due to wear.
3. Check the cutting system to ensure the blade is sharp and the edge is flat.
4. Check the shaping system to ensure the smoothness of the shaping rollers and roller seats.
III. Repair and replacement of key components
1. Gearbox maintenance: Use a wire brush to remove dust and grease, and replace with new lubricating oil.
2. Replacement of the screw guide wheel and guide wheel seat: If the screw guide wheel and guide wheel are found to be worn, they need to be replaced with new ones.
3. Replacement of the pressure roller and cutting blade: If the pressure roller and blade are found to be worn, they need to be replaced with new ones.
4. Replacement of the shaping roller: If the shaping roller is found to be damaged or worn, it needs to be replaced with a new shaping roller.
The above is the maintenance guide for the steel bar straightening machine. Machine maintenance is very important, which can extend the service life of the machine and ensure the normal operation of the machine. In practice, users should also perform maintenance and repair work based on the actual situation and usage of the machine to ensure safe operation, work efficiency and quality of the machine.